SMD DAMORE
D’Amore Engineering blev grundlagt i det sydlige Californien i 2011 af to audio / elektriske ingeniører med en passion for kvalitetsprodukter.
Frustreret over at se vores hobby gå af helvede til , satte vi os for at redde verden fra dårligt lydudstyr og dårlige justerings metoder.
Vi har siden solgt over 10.000 DD-1 Distortion Detector værktøjer og tusinder af vores andre håndholdte redskaber til meget glade kunder.

Vægt	2 kg

The Crossover Calibrator (CC-1)
Protective silicon rubber boot
Calibrated Test tone CD
Harness
This manual
Pride of ownership
About the design

When you pick up the CC-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a power source for a few reasons:
They are readily available
Isolating the CC-1 from the vehicle’s electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal, not noise in the charging system
We also chose an RCA input connector for a few reasons:
It makes it pretty easy to measure the output of a headunit directly, if you choose to do so
Should the harness become damaged it is easily replaceable or repairable in the field
Specifications

Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front.
The Crossover Calibrator’s circuitry is digital microprocessor controlled
Crossover -3dB point accuracy +/- 0.25dB
Gain matching accuracy +/- 0.10dB
Low Battery LED trigger battery voltage < 6.5Vdc Auto-shut off timer 8 - 10 minutes after ON button is pressed Shipping Box 9 x 6 x 2 inches, 2 lbs

CC1 delefilter justering

Manual

Username
Password

	Remember Me Lost your password?

CC1 delefilter justering

Manual

Log ind