Atomo 4 Isokit-2,1m/ forstærker/isokabelkit/strømkabel

Technical Data Mosconi Atomo 4
POWER SUPPLY:

Power supply voltage:

10 – 16 V
DC-DC converter typology:
Unregulated – Push Pull
External fuse:

1 x 20 A
Power-on / Power-off voltage threshold:

9 V / 6 V
Mute delay time:

3 secs
Autosense power-on (HL only):
BTL source only
Overall efficiency:

> 75 %
Standby current:

< 0.1 mA (typical) Idle current: 0.58 A @ 14.4 V Thermal cutoff threshold: 93 °C (± 5 %) OUTPUT POWER RMS @ 14.4 V (1 % THD) Output power RMS @ 4 Ω: 60 W x 4 or 150 W x 2 [BTL] Output power RMS @ 2 Ω: 75 W x 4 T.H.D. @ 4 Ohm: < 0.2 % (1 kHZ / 90 Power rating ref) T.H.D. @ 2 Ohm: 15 kOhm High level input impedance: 21 Ohm (dummy load with jumper) Ground reference (LL only): OPEN - 21 Ohm S/N (AP filter 10 Hz - 22 kHz): FEATURES Onboard filter configuration: OFF - HP - LP Onboard filter slope: 12 dB/Oct Onboard filter frequency: 80 Hz Autosense power-on (HL only): BTL source only Start&Stop compliance: YES CONNECTIONS Low/High level input : Micro-Fit Speaker out: Mini-Fit Power supply: Mini-Fit APPEARANCE Dimensions: 109 x 65 x 34 mm Weight: 320 g Finishing: Black anodized