• Velkommen til den nye bilstereoklub webshop.!

  • KLIK og se PHD HØJTALERE Måske de bedste i verden..

  • Vi håber du finder det du leder efter, ellers email os på:  bilstereoklub@gmail.com. !

Mosconi

Showing 1–60 of 74 results


  • Nu på lager:
    96Khz v 24bit samplerate modulet med både toslink out og analog rca stereo out .
    Samt remote ind og ud til flere forstærkere

    Kan benyttes til både Toslink , og Rca kabel lyd overførsel.

    Ønsker du et BT modul til Gladen One forstærkere og de mindre lydprocessore så er dette løsningen.
    Husk phono kabel og eller toslink kabel alt efter din forstærkers mulighed.

    HiRes audio lydkvalitet
    The conversions and transmissions are done
    at up to 96 kHz/24 bits, after which fact the
    AMAS96K is named, making it a HiRes audiocompatible
    device. At least theoretically,
    because the Bluetooth route as a bottleneck
    most likely requires loss-involving compression.
    Even aptX dare to go only up to 48/24
    while admitting that the transfer is loss-prone.
    In addition, at least at the current point
    in time, you have to fi nd a smartphone and
    an app supporting 96 kHz/24 bits via Bluetooth
    in the fi rst place. But even without
    the full usability of HiRes fi les, it is nice that
    the AMAS96K now is state-of-the-art. And of
    course it can also handle the good old CD
    quality.

  • Indeholder :
    ÆGTE WATT
    Target powers (RMS):
    100 Watt per channel @ 4 Ohm
    160 Watt per channel @ 2 Ohm
    320 Watt BTL mode @ 4 Ohm
    500 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V (RMS)
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    215x200x50 mm
    Weight:
    2 Kg
    Se også vores videoer på området på vores youtube kanal 

  • Indeholder :
    ÆGTE WATT
    Target powers (RMS):
    100 Watt per channel @ 4 Ohm
    160 Watt per channel @ 2 Ohm
    320 Watt BTL mode @ 4 Ohm
    500 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V (RMS)
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    215x200x50 mm
    Weight:
    2 Kg
    Se også vores videoer på området på vores youtube kanal 

  • Indeholder :
    ÆGTE WATT
    4-Channel High Power
    Class-AB amplifier with
    SMD-Technology in silver
    Target powers:
    100 Watt per channel @ 4 Ohm
    155 Watt per channel @ 2 Ohm
    310 Watt BTL mode @ 4 Ohm
    480 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    4-Channel High Power
    Class-AB amplifier with
    SMD-Technology in Whitegrey
    Target powers:
    100 Watt per channel @ 4 Ohm
    155 Watt per channel @ 2 Ohm
    310 Watt BTL mode @ 4 Ohm
    480 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    4-Channel High Power
    Class-AB amplifier with
    SMD-Technology in white
    Target powers:
    100 Watt per channel @ 4 Ohm
    155 Watt per channel @ 2 Ohm
    310 Watt BTL mode @ 4 Ohm
    480 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in silver
    Target powers (RMS):
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    1000 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V (RMS)
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in silvergrey
    Target powers (RMS):
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    1000 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V (RMS)
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in silvergrey
    Target powers (RMS):
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    1000 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V (RMS)
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    350x200x50 mm
    Weight:
    3 Kg

  • Indeholder :
    ÆGTE WATT
    AS 200.4 Whitegrey
    Target powers:
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    950 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,3 Kg

  • Indeholder :
    ÆGTE WATT
    AS 200.4 Whitegrey
    Target powers:
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    950 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,3 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in SilverGrey
    Size: 590x200x50 mm
    Target powers:
    300 Watt per channel @ 4 Ohm
    550 Watt per channel @ 2 Ohm
    1100 Watt BTL mode @ 4 Ohm
    1800 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,1 Kg

    Varen er et Bestillingskøb, og der er derfor længere leveringstid.
    Varen produceres først efter køb.
    Du kan derfor ikke afbestille produktet, efter produktionen er igangsat.

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in SilverGrey
    Size: 590x200x50 mm
    Target powers:
    300 Watt per channel @ 4 Ohm
    550 Watt per channel @ 2 Ohm
    1100 Watt BTL mode @ 4 Ohm
    1800 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,1 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power
    Class-AB amplifier with
    SMD-Technology in white
    Size: 590x200x50 mm
    Target powers:
    300 Watt per channel @ 4 Ohm
    550 Watt per channel @ 2 Ohm
    1100 Watt BTL mode @ 4 Ohm
    1800 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,1 Kg

  • Indeholder :
    AS LED FRAMES rød
    Plastik rammer med led lys som gør din installation unik.
    Designet til dem som vil ha et lækkert udseende af deres forstærker.
    Et godt og færdigt alternativ til neon/led lys.
    Der benyttes :
    – High-brightness RED or BLUE LEDs in SMT
    – Switch on/off kontrolleres af forstærker.

  • Indeholder :
    ÆGTE WATT
    Target powers:
    200 Watt per channel @ 4 Ohm
    320 Watt per channel @ 2 Ohm
    640 Watt BTL mode @ 4 Ohm
    950 Watt BTL mode @ 2 Ohm*
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 5 V
    Xover functions: (BAND Pass allowed)
    HIGH Pass & LOW Pass
    (20 ÷ 175 Hz) & (50 ÷ 300 Hz)
    Filter slope – Filter “Q”:
    12 dB/oct – 0.7 (Stereo & Mono)
    Size:
    590x200x50 mm
    Weight:
    5,3 Kg

  • Indeholder :
    ÆGTE WATT
    4-channel Fullrange
    Class D Amplifier
    With High-Level + Autosense, BTL/SE/off Auto Sense
    Target powers:
    105 Watt @ 4 Ohm 14V4
    130 Watt @ 2 Ohm 13V8
    2 x 90 Watt + 1 x 280 Watt @ 4 Ohm 13V8
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (45 ÷ 310 Hz)
    Slope: 12 dB/oct – “Q”: 0.7 (Stereo & Mono)
    Special Features:
    Remote Volume Control (optional)
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Size:
    201 x 144 x 41 mm
    Weight:
    1230 g

  • Indeholder :
    ÆGTE WATT
    Class D, 4-channel forstærker with on-board DSP + 2 digitally processed line outputs.
    DSP with SP-DIF digital input, AUX inputs suitable for hands-free set, mobile navigation and external stereo sources.
    Target powers:
    100 Watt @ 4 Ohm 14V4
    130 Watt @ 2 Ohm 13V8
    Input sensitivity: (Power rating ref)
    0.75 V ÷ 12 V (Low Level)
    1.9 V ÷ 31 V (High Level)
    Xover functions: (always in line)
    Subsonic Filter: (10 ÷ 20000 Hz)
    Low Pass Filter: (10 ÷ 20000 Hz)
    Slope (dB/Oct): 6-12 [up to 60 (CH1-2-3-4) or 48 (CH5-6), if cascaded]
    Band pass allowed, Variable Q: 0.5 ÷ 40
    Special Features:
    Remote Volume Control (optional)
    Phase Inversion: 0° ÷ 180°
    Time delay (ms): 0 ÷ 15 (0.02 steps)
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Low Level Output (CH5/6)
    Size:
    150x140x40 mm
    Weight:
    1028 g

  • Indeholder :
    ÆGTE WATT
    2-channel Fullrange
    Class D Amplifier
    With High-Level + Autosense, BTL/SE/off Auto Sense
    Target powers:
    150 Watt @ 4 Ohm 14V4
    225 Watt @ 2 Ohm 13V8
    1 x 450 Watt @ 4 Ohm 13V8
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    (20 ÷ 175 Hz) & (45 ÷ 310 Hz)
    Slope: 12 dB/oct – “Q”: 0.7 (Stereo & Mono)
    Special Features:
    Remote Volume Control (optional)
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Size:
    201 x 144 x 41 mm
    Weight:
    1190 g

  • Indeholder :
    ÆGTE WATT
    1-channel Fullrange
    Class D Amplifier
    With High-Level + Autosense, BTL/SE/off Auto Sense
    Target powers:
    1 x 475 Watt @ 4 Ohm 14V4
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 14 V
    Xover functions:
    HIGH Pass & LOW Pass & BAND Pass
    HP: 20 ÷ 175 Hz – “Q”: 1
    LP: 45 ÷ 310 Hz – “Q”: 0.7
    Slope: 12 dB/oct
    Special Features:
    Remote Volume Control (optional)
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Size:
    151 x 144 x 41 mm
    Weight:
    990 g

  • Target powers (14V4):
    80W @ 4 Ohm
    100W @ 2 Ohm
    70W x 4 + 215W x 1 (Ch 5-6) @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.27 V ÷ 8.5 V (Low Level)
    0.7 V ÷ 22 V (High Level)
    Xover functions: (always in line)
    Subsonic Filter: (10 ÷ 20000 Hz)
    Low Pass Filter: (10 ÷ 20000 Hz)
    Slope (dB/Oct): 6-12 [up to 60 (CH1-2-3-4) or 48 (CH5-6-7-8), if cascaded]
    Band pass allowed, Variable Q: 0.5 ÷ 40
    Special Features:
    Remote Volume Control (optional)
    Phase Inversion: 0° ÷ 180°
    Time delay (ms): 0 ÷ 15 (0.02 steps)
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Low Level Output (CH7/8)
    Size:
    200x145x40 mm
    Weight:
    1340 g

  • Indeholder :
    Lydprocessor 4 indgange og 6 udgange

    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
    INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
    MAX OUTPUT SIGNAL: 4Vrms
    OUTPUT IMPEDANCE: 50 ohm
    THD DISTORTION:
    FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
    CHANNEL SEPARATION: >75dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.5A @ 12V
    GROUND ISOLATION vs CAR BODY: 1Kohm
    AUTOSENSE: two operative modes (yes, HL only)
    REMOTE OUTPUT: 130mA max.
    COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Lydprocessor 4 indgange og 6 udgange
    Med digital input output
    Digital inputs optical and coaxial SP-Dif
    SP-Dif output (optical) with volume-regulated signal from channel 1+2.

    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
    INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
    MAX OUTPUT SIGNAL: 4Vrms
    OUTPUT IMPEDANCE: 50 ohm
    THD DISTORTION:
    FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
    CHANNEL SEPARATION: >75dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.5A @ 12V
    GROUND ISOLATION vs CAR BODY: 1Kohm
    AUTOSENSE: two operative modes (yes, HL only)
    REMOTE OUTPUT: 130mA max.
    COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Lydprocessor 6 indgange og 8 udgange

    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 12KOhm (LL) / 47Ohm (HL)
    INPUT SENSITIVITY: 1.2Vrms ÷ 8Vrms (LL) / 3Vrms ÷ 20Vrms

    (HL)
    INPUT VOLTAGE REGULATION: -16.5dB ÷ 0dB
    MAX OUTPUT SIGNAL: 8Vrms
    OUTPUT IMPEDANCE: 600 Ohm
    THD DISTORTION: <0.003% @ 4Vrms
    FREQUENCY RESPONSE: 10Hz ÷ 63KHz (within -0.1dB)
    CHANNEL SEPARATION: >90dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.9A @ 12V
    AUTOSENSE: OFF / BTL / SE
    REMOTE OUTPUT: 100mA max.
    COMMUNICATION PERIPHERALS: USB,RCD/RC-MINI (optional),
    MOS-BTM (optional)
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Lydprocessor 6 indgange og 8 udgange

    8volt version
    Stand-Alone Processor
    6-channel input
    8-channel output
    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
    INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
    MAX OUTPUT SIGNAL: 8Vrms
    OUTPUT IMPEDANCE: 50 ohm
    THD DISTORTION: <0.003% @ 1Vrms
    FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
    CHANNEL SEPARATION: >75dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.5A @ 12V
    GROUND ISOLATION vs CAR BODY: 1Kohm
    AUTOSENSE: two operative modes (yes, HL only)
    REMOTE OUTPUT: 130mA max.
    COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
    EXPANSION SLOT: External Memory (EEprom).
    OPTICAL BOARD: Optional.
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Lydprocessor 8 indgange og 12 udgange

    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 12KOhm (LL) / 47Ohm (HL)
    INPUT SENSITIVITY: 1.2Vrms ÷ 8Vrms (LL) / 3Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -16.5dB ÷ 0dB
    MAX OUTPUT SIGNAL: 8Vrms
    OUTPUT IMPEDANCE: 600 Ohm
    THD DISTORTION: <0.003% @ 4Vrms
    FREQUENCY RESPONSE: 10Hz ÷ 63KHz (within -0.1dB)
    CHANNEL SEPARATION: >90dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.9A @ 12V
    AUTOSENSE: OFF / BTL / SE
    REMOTE OUTPUT: 100mA max.
    COMMUNICATION PERIPHERALS: USB,RCD/RC-MINI (optional), MOS-BTM (optional)
    SIZE: 200 x 125 x 40 mm (including fixing feet

  • Ny lydprocessor MOSCONI GLADEN DSP 8to12 PRO v8

    Se alle de spændende data under specifikationer og i PDF herunder.

  • Indeholder :
    Lydprocessor 6 indgange og 8 udgange

    4volt version
    Stand-Alone Processor
    6-channel input
    8-channel output
    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
    INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
    MAX OUTPUT SIGNAL: 8Vrms
    OUTPUT IMPEDANCE: 50 ohm
    THD DISTORTION: <0.003% @ 1Vrms
    FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
    CHANNEL SEPARATION: >75dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.5A @ 12V
    GROUND ISOLATION vs CAR BODY: 1Kohm
    AUTOSENSE: two operative modes (yes, HL only)
    REMOTE OUTPUT: 130mA max.
    COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
    EXPANSION SLOT: External Memory (EEprom).
    OPTICAL BOARD: Optional.
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Lydprocessor 6 indgange og 8 udgange

    8volt version
    Stand-Alone Processor
    6-channel input
    8-channel output
    Technical Specifications:
    INPUT MODE: Low Level (LL) / High Level (HL)
    INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
    INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
    INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
    MAX OUTPUT SIGNAL: 8Vrms
    OUTPUT IMPEDANCE: 50 ohm
    THD DISTORTION: <0.003% @ 1Vrms
    FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
    CHANNEL SEPARATION: >75dB (@ 1KHz)
    SUPPLY VOLTAGE: 11V ÷ 15V
    CURRENT CONSUMPTION: 0.5A @ 12V
    GROUND ISOLATION vs CAR BODY: 1Kohm
    AUTOSENSE: two operative modes (yes, HL only)
    REMOTE OUTPUT: 130mA max.
    COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
    EXPANSION SLOT: External Memory (EEprom).
    OPTICAL BOARD: Optional.
    SIZE: 150 x 125 x 40 mm (including fixing feet)

  • Indeholder :
    Mikrofon der bruges til håndfri telefoni funktion via Mosconi DSP 6to8 lydprocessor.

  • Indeholder :
    ÆGTE WATT
    Class-D
    1-Channel High Power amplifier
    2 ohm optimized
    1x 1000 Watt RMS / 2 ohm
    Target powers:
    600 Watt @ 4 Ohm
    1000 Watt @ 2 Ohm
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 4 V (Low Level)
    0.5 V ÷ 10 V (High Level)
    Xover functions: (always in line)
    Subsonic Filter: (20 ÷ 100 Hz – 24 dB/oct)
    Low Pass Filter: (40 ÷ 280 Hz – 24 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    Phase Shift (always in line): 0° ÷ 360°
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Low Level Output (like HLA) Size:
    310x200x50 mm
    Weight:
    2,7 Kg

  • Indeholder :
    ÆGTE WATT
    24volt version
    Class-D
    1-Channel High Power amplifier
    2 ohm optimized
    1x 1000 Watt RMS / 2 ohm
    Target powers:
    600 Watt @ 4 Ohm
    1000 Watt @ 2 Ohm
    Input sensitivity: (Power rating ref)
    0.2 V ÷ 4 V (Low Level)
    0.5 V ÷ 10 V (High Level)
    Xover functions: (always in line)
    Subsonic Filter: (20 ÷ 100 Hz – 24 dB/oct)
    Low Pass Filter: (40 ÷ 280 Hz – 24 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    Phase Shift (always in line): 0° ÷ 360°
    Low Level / High Level imput mode (by switch)
    Auto Sense (only in High Level mode)
    Low Level Output (like HLA) Size:
    310x200x50 mm
    Weight:
    2,7 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power amplifier
    2x 120 Watt RMS / 4 Ohm
    Size: 190x200x50 mm

    Target powers:
    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    190x200x50 mm
    Weight:
    1,6 Kg

  • Indeholder :
    ÆGTE WATT
    4-Channel High Power amplifier
    4x 130 Watt RMS / 4 ohm
    Target powers:
    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,6 Kg

  • Indeholder :
    ÆGTE WATT
    24volt version
    4-Channel High Power amplifier
    4x 130 Watt RMS / 4 ohm
    Target powers:
    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,6 Kg

  • Indeholder :
    ÆGTE WATT
    24volt version
    4-Channel High Power amplifier
    4x 130 Watt RMS / 4 ohm
    Target powers:
    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,6 Kg

  • Indeholder :

    12volt til bilen.
    Output powers:
    130 Watt per channel @ 4 Ohm 67 dBA (ref: 1 Watt into 4 Ohm)

    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm “subwoofer”

    LÆS den fantastiske historie om dette produkt under SPECIFIKATIONER herunder:
    Mange nye ting mulige.

  • Indeholder :

    24volt til lastbilen.
    Output powers:
    130 Watt per channel @ 4 Ohm 67 dBA (ref: 1 Watt into 4 Ohm)

    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm “subwoofer”

    LÆS den fantastiske historie om dette produkt under SPECIFIKATIONER herunder:
    Mange nye ting mulige.

  • Indeholder :

    12volt til bilen.
    Output powers:
    130 Watt per channel @ 4 Ohm 67 dBA (ref: 1 Watt into 4 Ohm)

    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm “subwoofer”

    LÆS den fantastiske historie om dette produkt under SPECIFIKATIONER herunder:
    Mange nye ting mulige.

  • Indeholder :
    Molex stik til højtaler udgange.
    ÆGTE WATT
    4-Channel High Power amplifier
    4x 130 Watt RMS / 4 ohm
    Target powers:
    130 Watt per channel @ 4 Ohm
    175 Watt per channel @ 2 Ohm
    350 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,6 Kg

  • Indeholder :
    ÆGTE WATT
    2-Channel High Power amplifier
    2x 250 Watt RMS / 4 Ohm
    Target powers:
    250 Watt per channel @ 4 Ohm
    340 Watt per channel @ 2 Ohm
    680 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,5 Kg

  • Indeholder :
    ÆGTE WATT
    8-Channel High Power amplifier
    With DSP Technology
    8x 60 Watt RMS / 4 Ohm
    Target powers:
    60 Watt x 8 @ 4 Ohm
    or 60 Watt x 4 + 120 Watt x 2 @ 4 Ohm
    xx Watt per channel @ 2 Ohm
    or xx Watt per channel @ 2 Ohm
    180 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.8 V ÷ 16 V (LL/HL)
    Features & Xover functions:
    High Low Adapter
    Autosense power-on (High Level only, SE or BTL mode)
    Hand-free, Navigator, AUX inputs
    Auto-Fading between inputs
    Signal Mix capability
    USB cable for PC connection
    BT wireless module for PC connection (optional)
    GUI (Windows XP,VISTA 32/64bit and 7 32/64bit)
    Available hardware presets: two
    External memory for additional presets (optional)
    30 bands parametric equalizer
    Implemented filters type all standard filters available
    HP frequency range for each channel Hz 10 ÷ 20000
    LP frequency range for each channel Hz 10 ÷ 20000
    HP and LP filter slope for each cell dB/Oct 6 to 24 (up to 48 if cascaded)
    Band pass allowed yes
    Variable “Q” 0.25 ÷ 40
    Time delay ms 0 ÷ 15 (0,02 steps)
    Phase inversion for each channel 0 / 180°
    Gain level for each channel dB -115.5 ÷ 6
    Remote Volume Control (optional)
    Size:
    300x200x50 mm
    Weight:
    2,6 Kg

  • Indeholder :
    ÆGTE WATT
    6-Channel High Power amplifier
    6x 70 Watt RMS / 4 Ohm
    6x 100 Watt RMS / 2 Ohm
    Target powers:
    70 Watt per channel @ 4 Ohm
    100 Watt per channel @ 2 Ohm
    70 Watt x 4 Ohm + 230 Watt x 1 Ohm
    200 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions (FRONT):
    HP (ON-OFF)
    (45 ÷ 225 Hz – 12 dB/oct)
    Xover functions (REAR):
    LP or HP (always ON)
    (20 ÷ 225 Hz – 12 dB/oct)
    Xover functions (SUB):
    LP (ON-OFF)
    (45 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    FSA (FRONT section)
    Phase Shift (SUB section)
    High Low Adapter
    Size:
    310x200x50 mm
    Weight:
    2,7 Kg

  • Indeholder :
    ÆGTE WATT
    4-Channel High Power amplifier
    4x 80 Watt RMS / 4 Ohm
    4x 115 Watt RMS / 2 Ohm
    Target powers:
    80 Watt per channel @ 4 Ohm
    115 Watt per channel @ 2 Ohm
    230 Watt BTL mode @ 4 Ohm
    Input sensitivity: (Power rating ref)
    0.35 V ÷ 16 V
    Xover functions: (HIGH Pass or LOW Pass)
    HIGH Pass or LOW Pass
    (20 ÷ 225 Hz – 12 dB/oct)
    Special Features:
    Remote Volume Control (optional)
    G-HOC socket
    High Low Adapter
    Size:
    190x200x50 mm
    Weight:
    1,6 Kg

  • Indeholder :

    Front Stage Adjuster Card
    til Mosconi D2, AS, ZERO, A CLASS og ONE line

    Se forklaring under specificationer.

  • Indeholder :
    Et udvalg af delefilter kort til  Mosconi forstærkere :
    Mosconi D2, AS, ZERO, A CLASS og den nye ONE line forstærker

    HIGH PASS (Hz):
    25, 30, 60, 70, 80, 90, 100, 120, 150, 200, 250, 300,
    400, 500, 600, 700, 800, 2000, 2500, 3000, 3500,
    4000, 5000, 6000, 6500, 7000, 8000

  • Indeholder :
    Et udvalg af delefilter kort til  Mosconi forstærkere :
    Mosconi D2, AS, ZERO, A CLASS og den nye ONE line forstærker

    LOW PASS (Hz):
    50, 60, 70, 80, 400, 500, 600, 700, 800, 2000, 2500,
    3000, 3500, 4000, 5000, 6000, 7000

  • High Low Level Adapter

    Omformer din radios højtaler udgange til rene Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    Improvement of HLA.2 and HLA.4
    The main improvements are:
    Ø No plastic case and plug, therefore very small and easy to install
    Ø The double possible input power handling
    Ø Remote output capability increased from 15 mA to 100 mA
    Ø Of course still made in Italy like all MOSCONI products now and in the future!

    Note:
    HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
    On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
    HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
    These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

  • High Low Level Adapter PRO til nye autoradioer med nye former for udgangstrin. Ca fra 2016 og frem 

    4-channel high-quality high/low converter
    Specifications like HLA-SUM only without summing function
    Auto sense for BTL (head units) or signal detection and delayed “off” (amplifiers)
    High maximum input load for OEM adaption with Sound System amplifiers in front

  • High Low Level Adapter

    Omformer din radios højtaler udgange til rene Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    Improvement of HLA.2 and HLA.4
    The main improvements are:
    Ø No plastic case and plug, therefore very small and easy to install
    Ø The double possible input power handling
    Ø Remote output capability increased from 15 mA to 100 mA
    Ø Of course still made in Italy like all MOSCONI products now and in the future!

    Note:
    HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
    On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
    HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
    These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

  • SE DATABLAD UNDER PDF FANEN.

    High Low Level Adapter til brug efter (High Power) Oem forstærkere.
    Eksempel : BMW biler med H&K premium sound S677.

    Omformer din radios højtaler udgange til Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    SE DATABLAD UNDER PDF FANEN.

  • High Low Adapter with Sum function
    Active signal processor circuitry for a superior sound performance;
    Full balanced input stage to improve noise rejection and response velocity;
    Improved ballast load to match output impedance of the radio;
    Unbalanced line output to drive any kind of amplifier;
    Low tolerance and high quality passive components;
    Optimized A class working operational amplifiers;
    Low Total Harmonic Distortion;
    Protection against power supply inversion;
    Switch-on signal (Remote) generation;
    Current protection on switch-on output to avoid damages when ground shorting occurs;
    Operative status red LED;
    Full Surface Mount Technology (SMT);
    Reduced size to optimize installation;
    4 channel Power Inputs on versatile and easy to use, removable, screw terminals;
    4 channel Line Level Outputs on solid RCA connectors;
    SUM capability on CH-1 outputs to rebuild filtered signals (multi-way systems);
    Professional Aluminum enclosure;
    BALANCE capability between CH-1 & CH-2 inputs (SUM mode only) so to optimize the system adjustment;
    Double side FR4 industry standard printed circuit board for long term reliability and excellent environmental stability;
    Optimized signal path to increase noise immunity;
    Shut down conditioning on switch-on signal to avoid bumps and pop noises;
    Supports High Power Output (B.T.L.) and Low Power Output (S.E.) radios;
    Very low quiescent current (less than 0.8mA @ 14V4);
    Low operative current consumption (less than 30 mA @ 14V4);
    Output signal up to 3.2Vrms @ 12V of power supply;
    Input stage can handle signals as high as 50W of equivalent power onto 4 Ohm;
    13 dB voltage attenuation between Power Input and Line Level Output (a 50Watt @ 4Ohm power signal applied to the input, produces a 3.2Vrms Line Output signal);
    Plug & Play – non intrusive installation.

  • Indeholder :
    AS LED FRAMES blå
    Plastik rammer med led lys som gør din installation unik.
    Designet til dem som vil ha et lækkert udseende af deres forstærker.
    Et godt og færdigt alternativ til neon/led lys.
    Der benyttes :
    – High-brightness RED or BLUE LEDs in SMT
    – Switch on/off kontrolleres af forstærker.

  • Indeholder:
    1 stk mosSWITCH med kabel.
    Kan kobles op på følgende enheder med RTC – HUB imellem :
    DSP 8TO12, DSP 6TO8, ONE 130.4DSP, ONE
    60.8DSP, D2 100.4DSP og D2 80.6DSP

  • Indeholder :
    1 stk Bluetooth Adapter

    Et kort der monteres i diverse enheder for derefter at kunne justere via PC eller android smartphone appen
    SPECIALLY MADE BY MOS TO BE USED
    EXCLUSIVELY WITH THE ONE 130.4DSP, ONE 60.8DSP, D2 100.4DSP
    D2 80.6DSP, DSP 6TO8, DSP 4TO6 AND DSP 4TO6DIF
    It allows to connect the DSP to the
    personal computer via Bluetooth,
    wireless.

  • Indeholder :
    Monocard til stabiliseret mono output ved brokobling

    BTL CARD
    Dette kort bruges mainly når forstærkeren arbejder i BTL brokoblet på en mono højtaler”bas”,
    specielt hvis højtaleren har en lav impedans.
    Kortets funktion garantere en perfekt balance imellem de 2 udgange right og left.
    Da forstærkeren ikke behandler mono output i de oprindlige udgangstrin.
    Og det forøger også forstærkers gain med +6db
    Samtidig aktiveres RTC remote indgangen så du får mulighed for at tilkoble bas kontrol fjernbetjeningen RTC.
    Køb blot en RTC og du behøver ikke købe en MOS_RTC når du har en G_FSA, dermed er der penge at spare.

  • Indeholder :
    1 bluetooth modul 

    Bluetooth modul til lydstreaming ind i mosconi produkter og i highres kvalitet, se datablade for mere info omkring high res
    udviklet til at bruges sammen med følgende produkter :
    D2 100.4DSP og D2 80.6DSP.
    Supports the A2DP profile. Plays formats WAVE, AAC, MP3 and
    lossless, PCM and FLAC.
    Fully certified Bluetooth version 3.0 audio module, fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1

  • Indeholder :
    ÆGTE WATT
    2-Channel Sound-Quality
    Class-A amplifier with
    SMD- Technology in
    silver-satin-finish
    Target powers:
    100 Watt per channel @ 4 Ohm
    200 Watt per channel @ 2 Ohm
    Input sensitivity (Power rating ref):
    0.2 V ÷ 5 V
    Special Features:
    Straight input to the output stage
    Dinamically controlled class on demand
    “AB” class threshold:
    30 WattRMS
    Size:
    450x250x50 mm
    Weight:
    5,3 Kg

  • Indeholder :
    8 kanaler input
    12 kanaler output
    DSP processor
    Forstærker
    Kan udvides med 96khz bluetooth modul.
    Har avanceret high low level input for Oem radio montage.

    Se flere data under info og PDF fanen.
    codename : Steamroller“

    Stereo RMS : 8 x 60 rms (BTL not allowed)
    Minimum allowed load : (3 ohm in stereo mode)
    Digital DSP processed output : 1x95khz/24bit
    Digital input : Optical/toslink
    Digital input 2 : Card 1
    Digtial input 3 : Card 2
    Onboard DSP : 294.912 mhz — 64 bit
    Onboard ADC : 96 khz/24bit SR – 107db S/N
    Onboard DAC : 95khz/24bit SR  – 106db S/N

    Overall efficiency : >80%
    Internal fuse : 1 x 20 amp.

  • Indholder:
    1 stk lagermodul Mos-EEP

    Kan kun bruges med DSP6TO8 AND ONE 130.4/120.4-DSP
    Extern hukommelse som tillader  at gemme flere presets i
    lydprocessoren end de 4 allerede  tilstede i DSP6TO8 og ONE120.4-DSP.
    Når kortet er sat i vil det override den nuværende hukommelse.
    Men det gør intet ved de allerede gemte presets.


Showing 1–60 of 74 results