Add to wishlist

mosHLA-DUAL 4 kanals high low level adapter med remote out/ BTL signal input

kr.559,00 Inkl. Moms

High Low Level Adapter

Omformer din radios højtaler udgange til rene Low Level pre outs.
Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
Ren lyd og helt fri for støj og basbump.

Improvement of HLA.2 and HLA.4
The main improvements are:
Ø No plastic case and plug, therefore very small and easy to install
Ø The double possible input power handling
Ø Remote output capability increased from 15 mA to 100 mA
Ø Of course still made in Italy like all MOSCONI products now and in the future!

Note:
HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

Add to wishlist
Varenummer (SKU): mosHLA-DUAL Kategorier: , , , , Brand:

Lidt om Mærket “Mosconi” som opstod som en simplificering for dette navn : “MOS selskab i SBU bil-audio markedet.” Mosonis historie er stadig meget kort og ved udgangen af ​​2008 var Ivan Mosconi, drevet af kærlighed til elektronik og lyd og han samler dermed et team af designere og ingeniører med årtiers erfaring i den professionelle audio sektor og efter et par måneder, i sommeren 2009, står den første linje af forstærkere fra Mosconi allerede på markedet, det var AS-serien.Siden 2006 har mosconi været i produktion, montage, teknik og industrialisering af produkter og elektroniske apparater. Mosconi har en meget enkel filosofi det er at sætte alt sit talent og erfaring i at tilbyde produkter og tjenester, der kan hjælpe med at forbedre hverdagen for samfundet, gennem et højt æstetisk udtryk.
Hver dag er medlemmerne af Mosconis personale igang med at stræbe efter dette mål.
Vi er dedikeret til den konstante forfølgelse og raffinering samt forbedre vores teknologier, så vi kan tilbyde mere effektive og intelligente produkter, men uden nogen form for kompromis til vores største styrke: vores unikke og bemærkelsesværdige designs.

Vægt 0,5 kg

High Low Adapter

Improvement of HLA.2 and HLA.4
The main improvements are:
Ø No plastic case and plug, therefore very small and easy to install
Ø The double possible input power handling
Ø Remote output capability increased from 15 mA to 100 mA
Ø Of course still made in Italy like all MOSCONI products now and in the future!

Note:
HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

Tecnical data:
Stand-By Current Consumption < 0.8mA Operative Current Consumption < 15mA (< 30mA in the Dual version) Polarity Inversion Protection Yes Max allowed current on Remote Out 100 mA (normal operation) Min allowed load on Remote Out 120 Ohm (normal operation) Remote Out Voltage > 12V @ Irem-out < 100mA Remote Out Short Circuit Protection Yes (to ground) Max Short Circuit duration on Remote Out < 10 second (*) Total Harmonic Distortion < 0.01% Slew Rate 10V/uS S/N Ratio > 100dB
Channel Separation > 60dB
Common Mode Noise Rejection > 60dB
Stepdown conversion ratio 4:1 V/V
High Level Input ballast impedance 45 Ohm / 2W each channel
Max continuous (sinewave) Power handling @ 4Ohm 25Wrms x CH
Max allowed Head-Unit nominal power handling 50W x CH (**)
Max Output Signal @ THD < 0.1% 3.2 Vrms Min Output Load Impedence 2 KOhm (*) if Max allowed time is exceeded, permanent damages to device may occour.
(**) maximum real RMS nominal power, not PMPO, peak, etc.

Data

Download File

Forklaring af High / low mode / Autosense SE / BTL

Download File