What a cool PCB
Do you know the problem many gets after installing a high preforming elektronic like an audio amplifier in their car or living room, its just like when
installing a hot wood stove in the log cabin or your tent, and the heat gets to you and your electronics.
Thats hooot. and its going to ruin your day, if the temperature is not tempered, then you are also not with a good temper.
And a bad temper can become pretty expensive, especially if the audio electronics burn up because of too little coooling on the PCBs.
Stay Frosty with the newly developed Cool PCB kit, that keeps your electronics and yourself, or your wood stove cooler than ever.
And automatic.
We made it easy, you can do it yourself, or you can buy the kit in pieces and assemble it yourself.
iF you are not into software, and coding, or the soldering thingy but just want a piece that works out of the box..
Buy or own hand produced full kit, then you only have to plug in the power, and the fans pwn plugs to the board and you are finished.
100% fully automatic cooling, that shuts down when the temperature is low enough, so you are not kept awake, or disturbing your low volume music.
Regulates RPMs in steps from pre determined temperature steps. Until your electronics go in the freezer..
Developed in Denmark.
Hand assembled also in Denmark.
Stay Frosty.
| Vægt | 0,3 kg |
|---|
1 stk Grill til Ciare CME200 midwoofer
Afbilledet højtaler enhed medfølger ikke
