Items to support your caraudio products.

Sometimes you need a product that is not made yet and fast, we try to support our caraudio products.
So you can get a great experience with it.

So here is another 3d printed product for your caraudio trip.

The post Gamma Insert plug, for Gamma GSRB-08 first appeared on Bilstereoklub.

Items to support your caraudio products.

Sometimes you need a product that is not made yet and fast, we try to support our caraudio products.
So you can get a great experience with it.

So here is another 3d printed product for your caraudio trip.

The post Amas P.H.F, holder for Bluetooth modul first appeared on Bilstereoklub.

Forstærker medfølger ikke.
"skal tilkøbes"  ;)
Desværre. ;)

The post Pico Protector BTS+ first appeared on Bilstereoklub.

Do you know the problem many gets after installing a high preforming elektronic like an audio amplifier in their car or living room, its just like when
installing a hot wood stove in the log cabin or your tent, and the heat gets to you and your electronics.
Thats hooot. and its going to ruin your day, if the temperature is not tempered, then you are also not with a good temper.
And a bad temper can become pretty expensive, especially if the audio electronics burn up because of too little coooling on the PCBs.

Stay Frosty with the newly developed Cool PCB kit, that keeps your electronics and yourself, or your wood stove cooler than ever.
And automatic.

We made it easy, you can do it yourself, or you can buy the kit in pieces and assemble it yourself.
iF you are not into software, and coding, or the soldering thingy but just want a piece that works out of the box..
Buy or own hand produced full kit, then you only have to plug in the power, and the fans pwn plugs to the board and you are finished.

100% fully automatic cooling, that shuts down when the temperature is low enough, so you are not kept awake, or disturbing your low volume music.
Regulates RPMs in steps from pre determined temperature steps. Until your electronics go in the freezer..

Developed in Denmark.
Hand assembled also in Denmark.
Stay Frosty.

The post Cool PCB Fan holder 80mm first appeared on Bilstereoklub.

Do you know the problem many gets after installing a high preforming elektronic like an audio amplifier in their car or living room, its just like when
installing a hot wood stove in the log cabin or your tent, and the heat gets to you and your electronics.
Thats hooot. and its going to ruin your day, if the temperature is not tempered, then you are also not with a good temper.
And a bad temper can become pretty expensive, especially if the audio electronics burn up because of too little coooling on the PCBs.

Stay Frosty with the newly developed Cool PCB kit, that keeps your electronics and yourself, or your wood stove cooler than ever.
And automatic.

We made it easy, you can do it yourself, or you can buy the kit in pieces and assemble it yourself.
iF you are not into software, and coding, or the soldering thingy but just want a piece that works out of the box..
Buy or own hand produced full kit, then you only have to plug in the power, and the fans pwn plugs to the board and you are finished.

100% fully automatic cooling, that shuts down when the temperature is low enough, so you are not kept awake, or disturbing your low volume music.
Regulates RPMs in steps from pre determined temperature steps. Until your electronics go in the freezer..

Developed in Denmark.
Hand assembled also in Denmark.
Stay Frosty.

The post Cool PCB Cover first appeared on Bilstereoklub.

Diskant holder til højre side, så du får samme udseende i hver side.

Det får du her ved at afmontere diskanten, og montere vores adapter, for derefter at sætte diskanten i den.
Se billeder.

Ledningen føres hele vejen igennem et hul i adapteren.

Tjek at dine astolper matcher dem på billeder ,før køb.

Lavet i temperatur bestandigt materialer.
Kan overmales, dog sjældent nødvendigt.

Astolpe beklædning, og orignal diskant medfølger ikke.
Det er kun plastik holder/kabinet der købes her.

The post Oem Diskant holder Scania Next gen/højre first appeared on Bilstereoklub.

Bedre diskant i venstre side.

Det får du her ved at afmontere diskanten, og montere vores adapter, for derefter at sætte diskanten i den.
Se billeder.

Ledningen føres hele vejen igennem et hul i adapteren.

Tjek at dine astolper matcher dem på billeder ,før køb.

Lavet i temperatur bestandigt materialer.
Kan overmales, dog sjældent nødvendigt.

Astolpe beklædning, og orignal diskant medfølger ikke.
Det er kun plastik holder/kabinet der købes her.

The post Oem Diskant holder Scania Next gen/venstre first appeared on Bilstereoklub.