• Velkommen til den nye bilstereoklub webshop.!

  • KLIK og se PHD HØJTALERE Måske de bedste i verden..

  • Vi håber du finder det du leder efter, ellers email os på:  bilstereoklub@gmail.com. !

PHONOKABLER

Showing all 25 results


  • Indholder:
    100 Pcs /Stk
    5 meter Rca

    Bulk package
    Save on

  • Indholder:
    1 stk:
    75 cm
    2 kanals

    Symmetric RCA cable

    Made in Germany

    Additional insulation for each wire pair with a numbered and colour-coded PVC sleeve

    Very flexible and tread-resistant owing to the use of a rubberlike jacket material

    Simple and fast handling due to the use of compound foil and a pre-twisted drain wire

    High bending cycles due to the tightly stranded Cu litz wires

    High transmission quality even with excess distances (low capacitance!)

    Properties: OFC oxygen free copper

     

  • Indholder:
    1 stk:
    1,5 m
    2 kanals

    Symmetric RCA cable

    Made in Germany

    Additional insulation for each wire pair with a numbered and colour-coded PVC sleeve

    Very flexible and tread-resistant owing to the use of a rubberlike jacket material

    Simple and fast handling due to the use of compound foil and a pre-twisted drain wire

    High bending cycles due to the tightly stranded Cu litz wires

    High transmission quality even with excess distances (low capacitance!)

    Properties: OFC oxygen free copper

     

  • Indholder:
    1 stk:
    3 m
    2 kanals

    Symmetric RCA cable

    Made in Germany

    Additional insulation for each wire pair with a numbered and colour-coded PVC sleeve

    Very flexible and tread-resistant owing to the use of a rubberlike jacket material

    Simple and fast handling due to the use of compound foil and a pre-twisted drain wire

    High bending cycles due to the tightly stranded Cu litz wires

    High transmission quality even with excess distances (low capacitance!)

    Properties: OFC oxygen free copper

     

  • Indholder:
    1 stk:
    5 m
    2 kanals

    Symmetric RCA cable

    Made in Germany

    Additional insulation for each wire pair with a numbered and colour-coded PVC sleeve

    Very flexible and tread-resistant owing to the use of a rubberlike jacket material

    Simple and fast handling due to the use of compound foil and a pre-twisted drain wire

    High bending cycles due to the tightly stranded Cu litz wires

    High transmission quality even with excess distances (low capacitance!)

    Properties: OFC oxygen free copper

     

  • Indholder:
    1 stk:  2 kanals phonokabel sæt i den valgte længde.
    Fremstillet til dig, på vores værksted.
    Made in DK
    Dette kabel er hjemmelavet på vores værksted fra løsdele og produceres pr ordre.
    Derfor ingen returret på disse kabler.
    Disse kabler er de bedste hvad angår signal overførsel pga. lav ohm pga. rent kobber kabel benyttet ofc. og gode lodninger med det bedste loddetin i verden.
    Samt er forbindelses RCA stik i en høj kvalitet som sikre en fast stabil forbindelse i lyd signalet fra eksempelvis DSP udgang til forstærker indgang.
    Kablet er symmetrisk og egner sig perfekt til vores type af forstærkere og DSP enheder input og output.

    Hvorfor lave dem selv.?
    Se ohm måle billeder og bedøm forskellen på masse producerede kabler og så vores hjemmelavede.

  • High Low Level Adapter

    Omformer din radios højtaler udgange til rene Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    Improvement of HLA.2 and HLA.4
    The main improvements are:
    Ø No plastic case and plug, therefore very small and easy to install
    Ø The double possible input power handling
    Ø Remote output capability increased from 15 mA to 100 mA
    Ø Of course still made in Italy like all MOSCONI products now and in the future!

    Note:
    HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
    On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
    HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
    These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

  • High Low Level Adapter PRO til nye autoradioer med nye former for udgangstrin. Ca fra 2016 og frem 

    4-channel high-quality high/low converter
    Specifications like HLA-SUM only without summing function
    Auto sense for BTL (head units) or signal detection and delayed “off” (amplifiers)
    High maximum input load for OEM adaption with Sound System amplifiers in front

  • High Low Level Adapter

    Omformer din radios højtaler udgange til rene Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    Improvement of HLA.2 and HLA.4
    The main improvements are:
    Ø No plastic case and plug, therefore very small and easy to install
    Ø The double possible input power handling
    Ø Remote output capability increased from 15 mA to 100 mA
    Ø Of course still made in Italy like all MOSCONI products now and in the future!

    Note:
    HLA-Slim / Dual are able to produce a stable and useful REMOTE signal only if the headunit is an high power unit (BTL).
    On these kind of headunits, each output has a steady state voltage which is used to detect when the headunit is powered on.
    HLA-Slim and/or Dual need at least 3Vdc on at least one of its inputs.
    These devices are not intended to sense the music signal, but only the dc voltage present on each BTL output.

  • SE DATABLAD UNDER PDF FANEN.

    High Low Level Adapter til brug efter (High Power) Oem forstærkere.
    Eksempel : BMW biler med H&K premium sound S677.

    Omformer din radios højtaler udgange til Low Level pre outs.
    Giver dig en Remote output til at tænde for din forstærker på det rigtige tidspunkt.
    Ren lyd og helt fri for støj og basbump.

    SE DATABLAD UNDER PDF FANEN.

  • High Low Adapter with Sum function
    Active signal processor circuitry for a superior sound performance;
    Full balanced input stage to improve noise rejection and response velocity;
    Improved ballast load to match output impedance of the radio;
    Unbalanced line output to drive any kind of amplifier;
    Low tolerance and high quality passive components;
    Optimized A class working operational amplifiers;
    Low Total Harmonic Distortion;
    Protection against power supply inversion;
    Switch-on signal (Remote) generation;
    Current protection on switch-on output to avoid damages when ground shorting occurs;
    Operative status red LED;
    Full Surface Mount Technology (SMT);
    Reduced size to optimize installation;
    4 channel Power Inputs on versatile and easy to use, removable, screw terminals;
    4 channel Line Level Outputs on solid RCA connectors;
    SUM capability on CH-1 outputs to rebuild filtered signals (multi-way systems);
    Professional Aluminum enclosure;
    BALANCE capability between CH-1 & CH-2 inputs (SUM mode only) so to optimize the system adjustment;
    Double side FR4 industry standard printed circuit board for long term reliability and excellent environmental stability;
    Optimized signal path to increase noise immunity;
    Shut down conditioning on switch-on signal to avoid bumps and pop noises;
    Supports High Power Output (B.T.L.) and Low Power Output (S.E.) radios;
    Very low quiescent current (less than 0.8mA @ 14V4);
    Low operative current consumption (less than 30 mA @ 14V4);
    Output signal up to 3.2Vrms @ 12V of power supply;
    Input stage can handle signals as high as 50W of equivalent power onto 4 Ohm;
    13 dB voltage attenuation between Power Input and Line Level Output (a 50Watt @ 4Ohm power signal applied to the input, produces a 3.2Vrms Line Output signal);
    Plug & Play – non intrusive installation.

  • High Low Line Adapter HTL 10 til nye autoradioer med nye former for udgangstrin med diagnose. Ca fra 2019 og frem 

    Ny type adapter til de vansklige radioer og forstærker systemer fra Oem “fabriks lydsystemer i nyere biler”
    Kort sagt vil denne adapter sørge for at diagnose systemet i bilen ikke slår lyden fra såfremt du indkobler forstærker / DSP på dit system.
    Har følgende  ledninger i stik:
    2 kanaler til input , high level.
    2 kanaler analog output med Rca udgang, low level.
    Remote output signal til forstærker tænding.
    Konstant plus og Minus.

    Leder du efter 6 kanals output, så er det ikke tilstede i denne form for adapter.
    Da man såfremt high end system skal bygges med 6 kanaler ,altid montere en DSP efter HTL10 for op til 12  rca udgange til fuld aktive eller passive systemer.
    Grunden til at kun 2 kanaler benyttes er pga simplificering af lydprocesseringen efterfølgende i processor.
    Funktioner som fader benyttes ikke længere i autoradio, men sættes op i DSP.

  • Indeholder :
    1 par
    Løse RCA stik til at fremtille egne signal kabler.
    Se også vores videoer på området på vores youtube kanal 

  • Indholder:
    1 stk:
    75 cm
    2 kanals

  • Indholder:
    1 stk:
    1,5 meter
    2 kanals

  • Indholder:
    1 stk:
    3 meter
    2 kanals

  • Indholder:
    1 stk:
    5 meter
    2 kanals

  • Indholder:
    1 stk:
    Y kabel

    Male Male – Female

  • Indholder:
    1 sæt:
    Y kabel

    Female-Female-Male

  • Indholder:
    1 stk
    Z-ChZERO 1,5m

     

  • Indholder:
    1 stk
    Z-ChZERO 2,5m

     

  • Indholder:
    1 stk
    Z-ChZERO 3,5m

     

  • Indholder:
    1 stk
    Z-ChZERO 5m

     


Showing all 25 results